(New) - M12x1.75x85 Brembo Caliper Assembly Bolts for Mitsubishi Evo 10 (4 ea.)

Torque specs: 65 ft-lbs

(New) - M12x1.75x90 Caliper Assembly Bolts For Brembo Calipers (4 ea.)…

Torque specs: 65 ft-lbs

Brembo caliper pad wear palte retaining screw for EVO 8/9/10 Front Calipers (4 ea/pack for 1 caliper)

Note: Screws offered are not exactly the same as OE in head (Allen vs. TORX) and length (8mm vs. 13mm) but they are easier to install and fit better than OE.

Caliper Pad Pins for Retrofit Correction to Brembo Caliper Assembly Defficiency (Pack of 4) - Retaining Screw are re-useable (Not included.)

Replacement Instructions:   1. Acquired the 10 point socket: Make sure the socket is deep enough, for Tesla Plaid Brembo calipers you will need 50mm in length, the shorter version (37mm) can not reach to the bolt head. 2. Loosen and remove the 10...

EVO 8/9/10 M12x1.5 Wheel Stud M12x1.5, 14mm longer than stock (10 pc. - Axle Set)

RacingBrake wheels studs are made of alloy steel, heat treated, and certified to SAE 10.9 class. Length: 57mm / 2.28" (14mm / .55" longer than stock studs)Proof Load: 830 MPa (120,000 psi)

M12x1.5x100 Caliper Mounting Bolts (4 ea.)

12.9 grade alloy steel bolts coated in DACRO to prevent corrosion.

M12x1.5x110 Caliper Mounting Bolts (4 ea.)

12.9 grade alloy steel bolts coated in DACRO to prevent corrosion.

M12x1.5x125 Caliper Mounting Bolts (4 ea.)

12.9 grade alloy steel bolts coated in DACRO to prevent corrosion.

M12x1.5x45 Caliper Mounting Bolts (4 ea.)

12.9 grade alloy steel bolts coated in DACRO to prevent corrosion.

M12x1.5x55 Caliper Mounting Bolts (4 ea.)

12.9 grade alloy steel bolts coated in DACRO to prevent corrosion.

M12x1.5x60 Caliper Mounting Bolts (4 ea.)

12.9 grade alloy steel bolts coated in DACRO to prevent corrosion.

M12x1.5x65 Caliper Mounting Bolts (4 ea.)

12.9 grade alloy steel bolts coated in DACRO to prevent corrosion.

M12x1.5x75 Caliper Mounting Bolts (4 ea.)

12.9 grade alloy steel bolts coated in DACRO to prevent corrosion.

M12x1.5x80 Caliper Mounting Bolts (4 ea.)

12.9 grade alloy steel bolts coated in DACRO to prevent corrosion.

M12x1.5x85 Caliper Mounting Bolts (4 ea.)

12.9 grade alloy steel bolts coated in DACRO to prevent corrosion.

M12x1.5x90 Caliper Mounting Bolts (4 ea.)

12.9 grade alloy steel bolts coated in DACRO to prevent corrosion.

M12x1.75x80 Brembo Caliper Assembly Bolts for Mitsu EVO 8/9 (not for 10), Acura TL Type S Calipers (4 ea.)

Torque specs: 65 ft-lbs

McLaren "U-clips" Hardware Kit for OE Brembo Front CCM Rotors (10ea.)

Includes 10 clips. These componets are "taken-off" from brand new OE Brembo CCM rotor assembly, brand new and never used.  

McLaren Hardware Kit for OE Brembo CCM Rear Rotors w/o Drum Brake (eg. Mclaren, Ferrari etc.)

These componnets are "take-off" from new OE Brembo CCM rotor assembly, brand new and never used.   Each set of hardware kit includes: 1 - Stainless spring 1 - M6 bolt (Choose length from option) 1 - M6 nut How to determine the thread...

McLaren Hardware Kit for OE Brembo Front CCM Rotors (Price/set) - Click "Buy in bulk and save" for Quantity Discount

Each set of hardware kit includes: 1 - U-Slot clip 1 - I-Block 1 - Stainless spring 1 - M6 bolt 1 - M6 nut These componnets are "take-off" from brand new OE Brembo CCM rotor assembly, brand new and never used.  

McLaren Hardware Kit for OE Brembo Rear CCM Rotors w/Stainless Steel Hat/Drum brake (Price/set) - Click "Buy in bulk and save" for Quantity Discount

Each set of hardware kit includes: 1 - I-Block 1 - Stainless spring 1 - M6 bolt 1 - M6 nut You would require 10 sets per rotor assembly. These componnets are "take-off" from brand new OE Brembo CCM rotor assembly, brand new and never used.

OE McLaren Style 2 pc Rotor Hardware Economy Kit (1 Set ea.)

This hardware kit is made to replace McLaren style hardware for Brembo OE two-piece rotors only such as EVO MB, Nissan GTR, Dodge Hellcat, Jeep Trackhawk etc.   Click here to see if I am buying the correct hardware: Brake hardware   Economy...

OE McLaren Style 2 pc Rotor Hardware Kit (1 Set ea.)

This hardware kit is made to replace McLaren style hardware for Brembo OE two-piece rotors only such as EVO MB, Nissan GTR, Dodge Hellcat, Jeep Trackhawk etc.   Click here to see if I am buying the correct hardware: Brake hardware   Includes:...

OE McLaren Style Hardware for Brembo OE two-piece rotors only such as EVO MB, Nissan GTR, Dodge Hellcat, Jeep Trackhawk - Spring only (1 ea.)

This hardware kit is made to replace McLaren style hardware for Brembo OE two-piece rotors only such as EVO MB, Nissan GTR, Dodge Hellcat, Jeep Trackhawk etc.   Click here to see if I am buying the correct hardware: Brake hardware   Kit...

RB 2 Pc Rotor Hardware Kit (Price is for 1 set), You would need 10 sets for 1 rotor assembly

1 set = 1 nut & 1 M6 stud Coated with dacrotized plating for rust resistance. Nut has self locking feature eliminating the use of loctite to keep the same torque w/o being affected by temperature. Order mutilpe sets at discounted pricing. Please...

RB Pad Pin Punch for Most OE Brembo Calipers, Available on Amazon

RB Wheel Stud 80mm (1 pc)

RB wheel studs are made of alloy steel, heat treated, and certified to SAE 10.9 class. They feature an 8mm hex head for easy installation and replacement. RB wheel nuts are made of alloy steel, with chrome plating for an attractive an

RB Wheel Studs & Nuts Conversion Kit - M12x1.5 (10 per pack)

Specification: Total length: 80mm Installing length: 67mm Hex head: 8mm  Stud aterial: Alloyed steel with block anodized finish. Wheel nut: Chrome plated for lasting finish. This wheel stud conversion kit is prefrred by most car enthusiasts who...